TUNING / ZERO
This device has vertical and horizontal tuning. You should only proceed to the Zero tuning after you have tuned the Hop-Up of the weapon. Adjustments should be made slowly and without applying excessive force.
PROTECT THE MIRA
These devices are sensitive optical instruments. It is possible to break a lens with a shot from an airsoft gun. For this reason, you should try to protect the lenses of your device, either with acrylic protection systems purchased from our store, or with DIY systems. This situation is more problematic in "Red-Dot" type devices than in Sniper sights.
MAINTENANCE
You should clean the lens of the device with the cleaning cloth included in the packaging, wiping it gently so that there are no scratches. You can moisten the cloth if necessary. You should clean the rest of the appliance with a toothbrush or a thick brush, to remove dust and the most ingrained debris.
STORAGE
The appliance must be kept dry and in an area without humidity. Keep protective caps on the lens while it is stored, or during transport.
DIOPTER ADJUSTMENT
The vast majority of "Sniper Scope" devices have a diopter adjustment on the eyepiece lens. You should place the device in the maximum application (if it has a magnification adjustment), point to the sky, and look at the reticle, as if you were pointing to infinity. If as soon as you see the reticle it is out of focus, the adjustment is not correct. The eye will compensate quickly, so what matters is how the reticle looks as soon as you look at it. Adjust the diopter a little and repeat the process until the reticle looks focused as soon as you look at it.